Odisha Cabinet Approves ₹4,708 Crore Pumped Storage Project for Renewable Energy
The 600 MW Upper Indravati project in Kalahandi will store electricity for peak demand, with commissioning targeted for the 2030–31 financial year.
The Odisha Cabinet has approved the cost, financial framework and contractor selection for the 600 MW Upper Indravati Pumped Storage Project, with a total investment of ₹4,708.64 crore.
The decision was taken on November 9, 2026, at a Cabinet meeting chaired by Chief Minister Mohan Charan Majhi. The project will be developed at Ranibahal in Kalahandi district through the Odisha Hydro Power Corporation Limited (OHPC).
Designed to store electricity during periods of surplus supply and deliver power when demand rises, the pumped storage project will support Odisha’s efforts to strengthen its electricity grid and accommodate more renewable energy.
Upper Indravati Pumped Storage Project: Key Details
The Cabinet approval covers the project’s overall expenditure, financing arrangements and selection of Megha Engineering & Infrastructures Limited (MEIL) as the engineering, procurement and construction contractor.
| Project component | Details |
|---|---|
| Project name | Upper Indravati Pumped Storage Project |
| Location | Ranibahal, Kalahandi district, Odisha |
| Planned capacity | 600 MW |
| Generating units | Four units of 150 MW each |
| Approved total cost | ₹4,708.64 crore, including GST |
| Implementing organisation | Odisha Hydro Power Corporation Limited |
| EPC contractor | Megha Engineering & Infrastructures Limited |
| Expected annual generation | Approximately 1,040 million units |
| Estimated annual pumping requirement | Approximately 1,283 million units |
| Target commissioning | Financial year 2030–31 |
How the ₹4,708.64 Crore Project Will Be Funded
The approved expenditure includes construction and associated costs such as consultancy, land acquisition, forest clearances and interest during construction.
The financing arrangement follows an 80:20 debt-to-equity structure.
OHPC will contribute 20% of the project cost as equity from its internal reserves. This contribution will be made in phases as implementation progresses.
The Odisha government will provide the remaining 80% through a loan, also released in phases according to the project’s funding requirements. The loan will carry an interest rate linked to the Reserve Bank of India’s repo rate.
This arrangement establishes how the project will receive funding over its development period, alongside the Cabinet’s approval of the overall cost and contractor.
Existing Indravati Reservoir Will Support the Project
According to OHPC’s project description, the facility will be developed adjacent to the existing Upper Indravati Hydro Electric Project.
It will use the existing Indravati reservoir as its upper reservoir. The development will also involve constructing a new lower reservoir and an underground powerhouse.
The proposed generating capacity will be divided among four units of 150 MW each, giving the facility a combined capacity of 600 MW.
These components will allow water to move between the reservoirs for pumping and generation, creating a large-scale electricity storage system.
How the Pumped Storage Project Will Work
Pumped storage uses water held at different elevations to store energy.
During periods when surplus electricity is available, the facility will use power to pump water from the lower reservoir to the upper reservoir. Raising the water stores energy that can be recovered later.
When electricity demand increases, water will flow from the upper reservoir through turbines, generating electricity before collecting in the lower reservoir.
The water can then be pumped uphill again during a subsequent charging cycle.
This process allows electricity supply to be shifted between different times of the day. It is particularly useful when the timing of electricity generation does not match the timing of demand.
Understanding the Generation and Pumping Estimates
The Upper Indravati project is expected to deliver approximately 1,040 million units of electricity annually during peak periods.
Its estimated annual electricity requirement for pumping is 1,283 million units.
The difference reflects the energy consumed in the storage and generation cycle. The project’s practical value comes from making electricity available at more useful times and providing flexibility to the grid.
The 600 MW figure describes its planned generating power capacity, while the annual figures describe the amount of electricity expected to be generated and consumed over a year.
These are project estimates; actual operating performance will become measurable after commissioning.
Why the Project Matters for Renewable Energy
Solar and wind generation vary with sunlight and weather conditions. Their output can sometimes exceed immediate demand, while generation may be lower during other periods when electricity is needed.
Storage helps manage this mismatch.
For example, surplus solar electricity available during the day can be used to pump water uphill. The stored energy can then support electricity supply later, including during evening demand.
Upper Indravati is expected to help Odisha manage fluctuations in supply and demand as renewable energy integration increases.
Officials have also identified potential grid-support functions, including frequency response, management of load variations, reserve support and black-start capability. These functions can help the electricity system respond to changing conditions and restore supply following major disruptions.
Commissioning Target Set for 2030–31
The project is targeted for commissioning in the 2030–31 financial year.
Its development has already passed earlier planning milestones. OHPC records that the Central Electricity Authority granted techno-economic clearance on August 19, 2024, followed by approval from Odisha’s Project Approval Committee on April 25, 2025.
The latest Cabinet decision establishes the approved cost, financing framework and EPC contractor for implementation.
Once commissioned, the Upper Indravati facility is intended to give Odisha additional flexibility to meet peak electricity demand and make better use of available renewable generation.
For more insights navigate: PressPire | Stories That Shape the Future
Read previous article here : nse-liquid-cooling-ai-224-gpus/
Follow PressPire on Facebook | Instagram | LinkedIn | YouTube
PressPire | Stories That Shape the Future